Have you considered acoustic treatment for your home? There is just too much reverberations and echo in your room, or you want to quiet down your room. Great! Lets do it! How much? $80 for a 2’x4′ a panel + shipping!!!! Can I DIY it cheaper? Yes!
I build mine around $45 per panel by using premium/professional acoustic material, but if you select cheaper acoustic material you can get that close to $35-$40 per panel!!!! (even cheaper if plywood goes down) 😎
How do you make speaker wire cables that can rival cables costing hundreds of dollars? Watch my video and read on of course! 😎
Cables, source for MUCH debate in the audio world. It’s “Snake Oil” vs “Your Just Deaf”! Can audio cables make your sound system sound better or different? Well, if you are like me, you will DIY your own pair of Venomous Snakes with an infinite amount of SNAKE OIL to lubricate your ears! 😮🐍😎🐍😂🐍
So here is the Krait Cable Build! Made form Canare 4s11 Oxygen Free Coper Wire(Made in Japan), in a star quad configuration to give you an 11 gauged wire! Paired with solid brass banana plugs, with two set screws that will keep that venom flowing till the end of time!😲🐍
It has been super busy the last few weeks so I did not have much time for DIY. However I did put together this quick video showing the speaker disassembly and tweeter replacement of the Polk CSi A6 Center Channel Speaker. It is a lot of speaker for $150 new, but I was lucky enough to get it very cheap used, BUT the tweeter was blown! 😒
Was it worth it replacing the tweeter? Is it worth buying this center channel new, or should I spend $150 on a DIY kit?
Replacing the tweeter or woofers is easy, as you can see in the video, all you need is a set of Hex Keys and the replacement drivers.
Over the winter break I finally got around to mount my TV on the wall!
I am a bit of a “baby audiophile” and I’ve been itching to bring a part of the home theater sound system into my family room! I couldn’t do that before because the TV was resting on the shelf and there was no room for my receiver and center channel… no receiver meant no big boy speakers either 😎. Also the TV was sitting too low, and it always put a strain on my neck when I tried to relax on my couches.😒
My neck and my ears had finally had enough!!!!
So, the solution was to mount my TV on the wall, free up the necessary shelf space, and be more comfortable when watching.
Read on to understand the reasons behind my methods, and check out my YouTube Video to see how I found MY best placement, and how I mounted the TV on the wall.
I was going to mount the TV on the wall anyways, so there is no point to wait for my “major renovation” of the family room. I can actually enjoy watching shows and movies NOW, so lets do it!
So after a few weekends of chore projects I decided to make something fun and creative. I didn’t want to spend time designing anything, and I just wanted to get into building ASAP!
So here it is, (as my fiend called it) the “Trophy” road bike stand 🤣!
It definitely had the trophy/commemorative plaque kind of feel without the paintjob, but once I put some color on it, it looks pretty slick!
It took me about 2.5hours to make a functional bike stand, and 1/2 of that time was spent eyeballing dimensions and looking for my tools. Painting, also took about 2 hours, spread over a few days. So with a simple sketch, you can make yourself a functional stand in about an hour!👍
You can check out how I built the stand on my YouTube channel! I thought it would be an easy video to edit, as I decided not to explain any of the steps, but it turned out that it took me way longer to make the video then to make stand! I think I am getting better at editing, but I have to stop making 15 minute videos of me walking around, it’s a pain sift through and edit out the 30 seconds of actual content! I hope you enjoy!😁
So around Thanksgiving break I decided to get some much needed exercise and rake in my leaves. And while at it, why not winterize my sprinklers?
When we got the house last year, we also inherited a functional sprinkler system! Hooray, we can finally have a nice yard… only to discover how expensive it is to water :(. It cost me about $200 a month, just to water the front yard!!! After 3 months and $600 I decided that a perfect yard is not all that important to me :D, and that I just need to maintain it at a respectable level. Perhaps a Well Pump would make much more sense in the future.
Regardless if I decide to get that lush green or just keep it neat, I need to make sure the sprinkler system is functional! (even in the back yard)
Where I live there is a chance that we get a nasty freezing winter, causing my sprinklers pipes to burst. If the weather holds below freezing for several days AND your sprinkler system is full of water, there is a good chance that the water will freeze, expand, and burst the sprinkler pipes.
To avoid that repair project (and save some $$$) I did some research and figured out how to do it myself! Its actually pretty simple, and once you do it the first time, you are good to go for many years to come!
Sprinkler Winterization/blowout will cost you anywhere between $50 and $250, with an average around $80.
Naturally I decided to make a “quick video” about it and show you how 🙂
I have already started posting content there, and it’s a bit overwhelming. It is only one YouTube video but it took me several nights over two weeks to actually edit something that resembles YouTube content :). I used an open source video editing software called Shotcut https://shotcut.org/ and it worked out pretty great. I was quite surprised how fast I picked it up, but when it comes to sound editing… I will leave that for the next video.
I wanted to do this for years, and I finally did it, a website where I can showcase some of my Do it Yourself (DIY) projects. I love building things on my own and get a great gratification from it. I hope that you can learn something new from my projects and get the confidence to tackle anything.
Here is a bit about myself.
I purchased my house about 8 years ago, and have been working on various hobbies and home improvement projects ever since. Those projects have spanned from building floor standing speakers, repairing high-end CD players, making a desk for my wife, renovating my kitchen and floors, building a closet, making lamps, making a flight simulator chair, repairing my car, maintaining my road bike, and many others. As you can tell from my list, DIY is a bit of a lifestyle for me and this blog will reflect this.
Life is busy, work, family but I hope to keep this up. Lately I have been itching to make furniture 🙂
DIY is a great way to save some $$, and who doesn’t like that 🙂